PressurePak banner

PressurePak | Resolute Industrial

 

800-537-9675

PressurePak

Facilitates leak checking, prevents non-condensibles entry

Undetected leaks result in unnecessary purge cycles which emit some refrigerant into the atmosphere. Also, leaks decrease reliability and performance by letting moisture-laden air and other non-condensibles into the refrigerant cycle. Unlike time-consuming and difficult hot water and nitrogen pressurization processes, the PressurePak system makes leak detection easier and faster.

Be compliant with federal regulations

Frequent leak checking and repair will help you be compliant with new Clean Air Act regulations on annual refrigerant leak rates, which have been set at 35% for industrial and refrigeration equipment and 15% for all other equipment. It not only makes good maintenance sense to eliminate chiller leaks, it’s now the law.

Save time and hassles

In four hours or less, the PressurePak system can circulate heated water through the evaporator, increasing pressure to approximately +5 PSIG. The chiller system can then be tested for leaks and returned to operation.

Benefits

  • Facilitates leak checking
  • Pressurizes chillers in 2 to 4 hours
  • Saves Time
  • Easy to install
PressurePak image

Portable Recovery Pak

RP-2200™ Water-Cooled Recovery Pak
24”L X 24”W X 28”H 150 lb.
R-134a Liquid Push/Pull Rate – 114.79 lb/min.
R-134a Vapor Recovery Rate – 2.54 lb/min.
RP-2200AC™ Air-Cooled Unit
R-134a Push/Pull Recovery – 140 lbs/min. or
63.5 kg/min Vapor Recovery – 2.25 lbs/min or
1.02 kg/min Final Vacuum – 14.0″ Hg
R-22 Push/Pull Recovery – 166 lbs/min
or 75.3 kg/min Vapor Recovery
1.52 lbs/min or 0.69 kg/min
rsr-5
RP-4400™ Water-Cooled Recovery Pak
57”L X 32”W X 65”H 850 lb.
R-134a Liquid Push/Pull Rate – 479.99 lb/min.
R-134a Vapor Recovery Rate – 11.51 lb/min.
RSR-4445 Refrigerant Storage & Recovery Unit
112”L X 42”W X 88”H 4,300 lb.
R-134a Liquid Push/Pull Rate – 479.99 lb/min.
R-134a Vapor Recovery Rate – 11.51 lb/min.
R-134a Capacity (80% @ 90°F) – 4,535 lb.

EasyTank™ Recovery Receiver

rsr-6
RT-2222 Recovery Receiver
93”L X 30”W X 46”H 1,300 lb.
R-134a Capacity (80% @ 90°F) – 1,992 lb.
rsr-7
RT-4445 Recovery Receiver
112”L X 42”W X 66”H 3,500 lb.
R-134a Capacity (80% @ 90°F) – 4,535 lb.

Refrigerant Storage & Recovery Units

 

RSR-2222 Refrigerant Storage & Recovery Unit
93”L X 30”W X 58”H 1,600 lb.
R-134a Liquid Push/Pull Rate – 114.79 lb/min.
R-134a Vapor Recovery Rate – 2.54 lb/min.
R-134a Capacity (80% @ 90°F) – 1,992 lb.

RT-4445 Recovery Receiver

112”L X 42”W X 66”H 3,500 lb.
R-134a Capacity (80% @ 90°F) – 4,535 lb.

Examples of Specials

Small Vertical Tank
with RP-2200 Unit
Large Vertical Tank
with RP-4400 Unit
and Full-Height
Liquid Level Gauge
rsr-11
Large Diameter
Tank with External
Liquid Level Gauge
rsr-12
Larger Tank for more than
20,000 lbs. of Refrigerant